关于 aspsmartupload 注册问题 - ASP技巧 - 网络编程

首页编程数据库网页图形冲浪邮件下载浏览器 QQ 系统办公软件站长安全手机邮件认证组网通信

网站首页 -> 网络编程 -> ASP技巧

关于 aspsmartupload 注册问题

发表日期：2001-4-30

ASPSMARTUPLOAD : DOCUMENTATION
Setup Instructions
Last modified: August 1st, 1999
© 2000 Advantys. All rights reserved.

Overview
Configuration required
Stage 1 : Extract the downloaded file
Stage 2 : Install aspSmartUpload.dll
Stage 3 : Install aspSmartUploadUtil.dll
Stage 4 : Install samples

--------------------------------------------------------------------------------

Overview

The installation of aspSmartUpload can be broken down into four main stages :

- extract the downloaded file
- saving the aspSmartUpload.dll file on the NT server
- add the aspSmartUploadUtil.dll fils in the NT server Path
- install the samples

These four stages are fully described below.

--------------------------------------------------------------------------------

Configuration required

Server :
- 300Ko of free disk space
- Windows NT 4 Service pack 3+, Microsoft IIS 4
or Windows 95+, Personal Web Server, ASP
or Windows 2000

For Microsoft IIS 3 users :
+ VB5 Runtime
+ asp.dll (version 1.0b+) : http://www.microsoft.com/office/intranet/modules/asp411s3.asp

Browser :
Your browser must be RFC 1867-compliant to be able to upload files.
Netscape 3+ and Microsoft IE 3.02+ accept the RFC 1867.

--------------------------------------------------------------------------------

Stage 1 : Extract the downloaded file

All the aspSmartUpload files are supplied in the zipped file, aspSmartUpload.zip.
Extract aspSmartUpload.zip to a temporary directory, making sure the directory structure remains intact.
If, for example, you extract the file to \temp, you should see the following :

--------------------------------------------------------------------------------

Stage 2 : Install aspSmartUpload.dll

You have to register aspSmartUpload.dll on your server. The dll can be registered by using either
Regsvr32.exe OR Microsoft Transaction Server (MTS).

1st Solution: Using RegSVR32
Copy aspSmartUpload.dll into a directory on the NT server (e.g. c:\mydir).
Save the component using the commands :
REGSVR32.EXE c:\mydir\aspSmartUpload.dll (From DOS or the Start/Run PRompt)

2nd Solution: Using Transaction Server
Select the NT server on which you wish to install aspSmartUpload.
Create a new batch.
In the component folder, create a new component called aspSmartUpload.
Paste aspSmartUpload.dll to the Transaction Server to save it.

--------------------------------------------------------------------------------

Stage 3 : Install aspSmartUploadUtil.dll

The objective is to enable the Operating System to access the aspSmartUploadUtil.dll file.

There is two ways to archieve this :
- Copy aspSmartUploadUtil.dll in the c:\winnt\system32 directory. That way you don't have to update the
PATH propertie.
- Copy aspSmartUploadUtil.dll into a directory on the NT server (e.g. c:\mydir).
Add the component directory in the PATH using the commands :
PATH=%PATH%;c:\mydir (From DOS)

--------------------------------------------------------------------------------

Stage 4 : Install samples

Installation
The ASP application must be installed in an ASP-script-enabled web directory.

If your site has the following structure :
\inetpub
\inetpub\scripts
\inetpub\wwwroot

Copy the
\temp\aspSmartUpload\MyInetpub\scripts\aspSmartUpload directory
to the
\inetpub\scripts directory on your server.
Copy the
\temp\aspSmartUpload\MyInetpub\wwwroot\aspSmartUpload directory
to the
\inetpub\wwwroot directory on your server.

Test
Using your browser, enter the following addresses :
http://your_web_server/aspSmartUpload/default.htm

Overview

It is possible to increase the level of security by using specific properties directly in the server's
registry base. That way, an ISP can define his own security parameters (maximum file size, access
authorization limited to virtual directories, etc). The developers cannot modifiy the ISP parameters
because the component uses in priority the security properties defined in the registry base.

--------------------------------------------------------------------------------

The Registry case

All the modifiable values in the Registry must be located under the following key:

HKEY_LOCAL_MACHINE\SOFTWARE\Advantys\aspSmartUpload

Use the REGEDIT command to add this key and the data and their chain values that you can select in the
list below.
All the following data are the string type. If you use the REGEDT32 command the data must be the REG_SZ
type.

--------------------------------------------------------------------------------

The Registry data

The following properties can be an entry in the Registry.
The component will only use their value if they are felt in.

TotalMaxFileSize Maximum allowed size of all files to be uploaded.
MaxFileSize Maximum allowed size of one file to be uploaded.
AllowedFilesList Contains the upload authorized file extensions list.
DeniedFilesList Contains the upload denied file extensions list.
DenyPhysicalPath Prevents file saving in directories other than virtual directories.

上一篇：Flash和Asp数据库的结合应用人气:14068
下一篇：利用XML不离开页面刷新数据人气:12617

网站文章搜索

邮件订阅服务

输入你的邮件地址，你将不会错过任何关于<ASP技巧教程>的内容

今日更新文章

·教你一种新思路调色教程
·使用Lab颜色通道调出照片完美色彩
·PS打造柔美风格色调教程
·教你给宝宝皮肤美白教程
·利用风景图片制作特色明信片
·PS给照片制作蓝天背景
·Photoshop制作沧桑颓废的城市海报
·如何才能出现”添加至百度首页“标志
·没学历没文凭没背景我选择了SEO
·不可小觑的论坛式外链
·SEO的价值并不仅仅体现在搜索引擎上
·Photoshop打造完美江景